I've had the photos for this project sitting around for a while so I thought I'd share it, since despite all the yumminess going on, you're really here for the crafts, right? Or am I THAT charming?
J is at an age where he loves books, LOVES them. I can read the same book to him multiple times morning and night and he'll point to it again and say "mo". His favorite title keeps changing, so we have more than a dozen (maybe 2 dozen) floating around on the table next to our special chair, on the shelf underneath, or scattered on the floor. This doesn't even include the ones he hasn't pulled off the real bookshelf; this is just his "read everyday" bookshelf. I really needed a way to keep all these books in order; otherwise, I'd spend time picking up every night just so he can find his FAVORITE book in the morning.
This idea was not originally mine. I have to give credit to a post I saw on Ohdeedoh way back in the day, when I was pregnant and surfing the web, thinking about all the cool things I could do with all the spare time I was going to have after giving birth. Riiiight. Anyways, I pretty much used her tutorial, but I'll add a couple of notes.
Here is my list of supplies:
1 - 48" length of 1/4" hot/cold PVC pipe. It's the cream colored one, not the white one. A 1/4" cream hot/cold PVC pipe is not the same as a 1/4" white cold only PVC pipe, as I found out, 3 hardware stores later.
10 - 1/4" PVC endcaps. Buy these the same time you buy the pipe, and make sure the end caps are completely flat on the bottom, and cream (hot/cold). I bought the white version the first time around, and they were rounded at the bottom, which won't work at all.
10 - 1/4" PVC 90 degree elbows, to match the rest of your PVC.
Silver spray paint for the pipes. Try to find either spray paint specifically made for plastic, or also buy a spray paint sealer.
1 - lazy susan. I got mine from Ikea for under $10.
Acrylic paint in your choice of colors.
Polyurethane sealer for the base. I followed the original recommendations and got the blue Minwax water-based can.
10 small wood screws, a drill, and a screwdriver.
1. First thing I did was paint my lazy susan. I freehanded what I hoped would be 5 equal parts with a pencil, taped off one section at a time, and painted on several layers of acrylic paint. Once I was satisfied with the color, I sealed with the poly sealer.
2. Cut the pvc pipes into 3 inch lengths. Drew gave me the option of using a hacksaw or this little device he had. Not sure what it's meant to do (nor do I know why/how he had it in that black hole we call a workroom), but it's really really good at cutting PVC, way better than a hacksaw. I clamped the pipe in a vice, and basically scored it using this device until the piece broke off, creating my 3" section with very smooth edges. The hacksaw made jagged edges.
2. Assemble the 3" pieces, end caps and elbows to make the "railings" of the merry-go-round. Then spray paint your 5 railings with the silver spray paint. I used normal spray paint, and it didn't stick very well to the PVC (my fingers were silver) until I finished it with a spray plastic sealer. The sealer can be found next to the spray paints at the Home Despot (as Drew likes to call it).
3. Once the PVC sections are dry, use them to mark where you will attach them to the lazy susan base. I set it pretty close to the edge, and marked the dividing line between each color. Pre-drill a small hole on your marks.
4. Take apart the railings and screw the bottom end caps into the base. I found that I needed to drill through the end cap as well before screwing down into the pre-drilled holes.
5. When the end caps are all secured, add the tops of the railings back on. You can glue them in, but I found the PVC to be a pretty tight fit (as long as you got all the right sizes!).
Now just add books! Of course, the board books fit best because they've got width to them. Our Dr. Seuss hardbacks stand up well also, but the paperbacks need to lean on something. J likes to stand and spin the book caddy and watch the books fall off. Maybe we'll use this project as a lesson in centrifugal force someday...